Scroll to top

Porphyry tiles

We obtain the characteristic porphyry tiles by cutting the natural porphyry slabs extracted in the quarry into rectangular shapes. Characterized by different sizes and thicknesses, this product has a natural visible upper face with edges that can be split or sawn using diamond discs.

The tiles are cut one by one by the operator who subsequently stacks them, depending on the size on pallets of 15 square meters. However, we can provide our customers with custom-sized pallets as needed.

Based on personal taste, it is possible to create a particular flooring using porphyry tiles of a single size, or by arranging alternate rows. Furthermore, thanks to our quarries, we offer tiles characterized by the different colors typical of Trentino porphyry.

Discover the prices of porphyry tiles now!

Use and installation of porphyry tiles

Porphyry tiles generally have pre-established widths characterized by steps of 5 cm, or 10-15-20-25-30-35-40 cm. The lengths, on the other hand, are variable, but it is possible to request fixed-size tiles as needed.

Depending on the type of flooring to be built, whether pedestrian, cladding or driveway, we offer porphyry tiles of different thickness.

Pedestrian or cladding: thin tiles with a thickness of 1 / 3.5 cm
Drive-over: tiles with a thickness equal to or greater than 2/6 cm

The installation on the floor takes place on a concrete screed bound by electro-welded mesh.
To lay 1 / 3.5 cm thin tiles, approximately 8 cm of thickness between the material and the bedding mortar is required. For the 2/6 cm tiles, about 10 cm thick are recommended; if space permits it is possible to use the 2/6 cm thickness also in pedestrian pavements.

During installation, each porphyry tile is “dirty” in the lower part with cement grout. This will serve as an adhesion between porphyry and bedding mortar.

Once the porphyry has been laid, proceed with the grouting of the joints with cement grout.

1. Normal split tiles
Natural top - Sliced ​​sides (split) - length to run

On request:

  • fixed length
  • square form
  • selected color red / purple

See also the cubes page.

Type Weight in place Use
from 10 cm Kg./sqm 100 approx.
from 15 cm Kg./sqm 100 approx.
from 20 cm Kg./sqm 100 approx.
from 25 cm Kg./sqm 105 approx.
from 30 cm Kg./sqm 110 approx.
from 35 cm Kg./sqm 110 approx.
from 40 cm Kg./sqm 110 approx.
from 45 cm Kg./sqm 110 approx.
from 50 cm Kg./sqm 110 approx.

See some of our works
2. Thin split tiles
Notural surface - Sliced ​​sides (split) - Length to run

On request:

  • fixed length
  • square form
  • selected color red / purple

See also the page of the Slabs-Mosaic.

Type Weight in place Use
from 10 cm Kg./mq 75 approx.
from 15 cm Kg./mq 75 approx.
from 20 cm Kg./mq 75 approx.
from 25 cm Kg./mq 75 approx.
from 30 cm Kg./mq 75 approx.
from 35 cm Kg./mq 75 approx.
from 40 cm Kg./mq 75 approx.

See some of our works
3. Coarse split tiles
Natural surface - Sliced ​​sides (split) - Free length

On request:

  • fixed length
  • square form
  • selected color red / purple

See also the beads page.

Type Weight in place Use
from 15 cm Kg./mq 150 approx.
from 20 cm Kg./mq 150 approx.
from 25 cm Kg./mq 150 approx.
from 30 cm Kg./mq 150 approx.
from 35 cm Kg./mq 150 approx.
from 40 cm Kg./mq 150 approx.

See some of our works
4. Sawn tiles
Red / violet mixed gray color (bulk)

On request:

  • fixed length
  • square form
  • thickness 4/7 or 5/8

See also the binderi page.

NATURAL TOP – 2/5 cm or 1/3 cm thick
Type Weight in place Use
from 15/20/25 cm Kg./sqm 100 approx.
from 30/35 cm Kg./sqm 110 approx.
from 40 cm Kg./sqm 115 approx.

 

SEMI-GLOSSY TOP – thickness 2/6
Type Weight in place
from 20 to 40 cm Kg./sqm 100 approx.

Fixed measures on request.

 

GLOSSY TOP – fixed thickness
Type Weight in place
from 20 to 30 cm Kg./sqm 100 approx.
from 31 to 40 cm Kg./sqm 100 approx.

Fixed measures on request.

 

FLAMED TOP – constant thickness – color
albian gray or red / purple
Type Weight in place
from 10 to 40 cm Kg./sqm 100 approx.

Fixed measures on request.

See some of our works

Maintenance

Maintaining a porphyry tile flooring is simple. It is sufficient to carry out a good cleaning with water from time to time, even with a hydro-cleaner. We do not recommend the use of detergents or acids that could ruin the cement seal.

C.A.P.A. Porfido is at your disposal

For any need, information or quote please do not hesitate to contact us.
Mob. +39 331 1915956 // +39 339 8648344



    Call Now Button
    X